Shoei RF-SR Solid Full Face Mens Motorcycle Helmets

Name: Shoei RF-SR Solid Full Face Mens Motorcycle Helmets
Brand: Shoei
Price: 399.99 USD
Availability: InStock

Be the first to review this product

In stock

SKU

0107-RF-SR-Solid-Helmet

UPC

Does Not Apply

As low as $399.99 Regular Price $479.99

Details

Shoei RF-SR Solid Full Face Mens Motorcycle Helmets

The Shoei RF-SR Helmet takes each step conceivable to generate a peaceful, relaxing ride. The CWR-1 shield is held securely up against the eyeport by using a constant tension sprung hinge design this significantly decreases possibilities for wind entrance. The outer shell of the RF-SR is wind tunnel fine tuned and produced in numerous sizes to keep the outer envelop as compact as possible. A more compact outer shell translates straight into less turbulence, neck strain and total weight. Components of the cushioned liner are interchangeable to dial in the most appropriate fit. Each RF-SR is hand made in Japan to the maximum standards and effortlessly outreaches DOT and SNELL M2015 safety certifications.

Aerodynamic Shell Design:

Aerodynamic attributes enhanced through extensive wind tunnel as well as suggestions from professional riders.
Double layer EPS liner increases impact absorption along with ventilation.
Four shell and six EPS liner sizes boost fit possibilities which help to comfortably fit most head sizes.

Ventilation System:

Two upper air intake ports are situated to increase air volume into the helmet interior; hot air is depleted through top avenue to get a much more comfortable ride.
Lower intake vent soaks up air exhaled from the mouth to help get rid of shield fogging.
Breath guard and chin curtain included.

Lightweight Advanced Integrated Matrix Plus (AIM+):

High performance fiber materials are incorporated with incredibly elastic organic fibers to produce a shell structure that is extremely lightweight, rigid and durable.

Interior:

The entire interior lining (cheek pads, upper liner, and chin strap covers) can be detached to clean, center and cheek pads can be exchanged with optional thicknesses for a customizable fit.
E.Q.R.S. (Emergency Quick Release System) enables emergency medical personnel to effortlessly remove the cheek pads from an injured rider’s helmet, allowing the helmet to be more conveniently taken away from the head.
Additional comfort delivered by detachable ear pads, breath guard, and chin curtain.
Standard chin strap clip neatly secures chin strap

CWR-1 Shield and QR-E System:

CWR-1 shield highlights ribs across the top and bottom to enhance rigidity and prevent bending from wind pressure while opening and closing.
Advanced window beading features dual-layered dual lip construction that guarantees a windproof and waterproof seal with each and every closing.
Locking mechanism effortlessly triggers the shield lock when fully closed.
Pinlock pins and EVO fog resistant lens insert included.
Spring-loaded base plates provide quick shield changes.
Five-stage rotating dial enables fine tuning of the base plate for effortless shield adjustments.
QR-E closing system makes it possible for tool-less shield removal and installation, and delivers an air-tight seal anticipated to substantially reduce wind noise.

Size Chart

Shoei Helmet Sizing Chart

Size	Hat Size	Centimeter	Inches
2X-Small	6 3/8 - 6 1/2	51 - 52	20 1/8 - 20 1/2
X-Small	6 5/8 - 6 3/4	53 - 54	20 7/8 - 21 1/4
Small	6 7/8 - 7	55 - 56	21 5/8 - 22
Medium	7 1/8 - 7 1/4	57 - 58	22 1/2 - 22 3/8
Large	7 3/8 - 7 1/2	59 - 60	23 1/4 - 23 5/8
X-Large	7 5/8 - 7 3/4	61 - 62	24 - 24 3/8
2X-Large	7 7/8 - 8	63 - 64	24 3/4 - 25 1/8

Helmet Sizing Information

"A proper-fitting motorcycle helmet can significantly reduce the risk of serious injury or death resulting from a head impact during an accident".

Measure Your Head
Determine the circumference of the widest part of your head by using a flexible tape measure. Generally, the widest part of a person's head is the area 2.5cm (1") above the eyes and ears.
However, we suggest measuring at a few points both above and below that line to determine the greatest measurement before referring to our size tables.
We also suggest testing the fit of a helmet one size smaller and one size larger then what the chart recommends. No helmet can provide protection if it's too uncomfortable to wear.
Try Wearing The Helmet
Helmets must fit snugly, but not painfully tight.
While holding the chinstraps outside of the helmet, pull it down over your head, taking care that the chinstraps do not go up inside the helmet.
A proper-fitting helmet will feel snug with fairly even pressure around the sides and top of your head. On most modern helmets the liner is designed to be a little extra snug at first, but will break-in after several hours of riding to match the particular shape of your head.
If you are not familiar with how a helmet should fit and feel, be sure to ask for assistance from a salesperson or a more experienced rider.
As a rule, the helmet should not be able to move around on your head without pulling on your skin. A loose fitting helmet is not only dangerous, but may also be noisy and tiring to wear.
Most people make the mistake of buying a helmet that's too large.
IMPORTANT: Make sure that you fasten the chinstrap securely beneath your chin when trying-on a helmet and then test to see that the helmet cannot be removed from your head when fastened in that manner.
Make The Right Decision
Most retail stores will not exchange purchased helmets if they've been worn for any length of time, so take your time, and wear the helmet inside the store for several minutes. Not every brand of helmet can fit every head size and shape. If you find that you just can't get a comfortably snug fit in our helmets we suggest you try a different brand. Helmets can't provide protection if they never get worn.

Safety Reminder - No helmet can protect the wearer against all possible or foreseeable impacts.
A helmet can only protect the portion of the head that is covered by the helmet.
For maximum protection, the helmet must be well fitted with the chinstrap securely fastened. Failure to follow these instructions, the instructions printed on the helmet, and those contained in the owner's manual may result in the possibility of the helmet coming off during an accident - possibly resulting in a severe head injury or even death.
While riding motorcycles, scooters, ATVs and snowmobiles is fun, it can also be a dangerous pastime.
At MxMegastore, we encourage you to enjoy riding responsibly, and to always ride within the limits of your abilities.

We found other products you might like!