- Lowest Price Guaranteed - Free Domestic Shipping on Orders $49+ -

Dirt Bike and Motorcross Boots

Items 1-20 of 130

Set Descending Direction
per page
View as Grid List

Items 1-20 of 130

Set Descending Direction
per page
View as Grid List

Other Popular Categories

 

Motocross and Dirt Bike Boots for Men | Buyer's Essential Info

Motocross boots are specialized footwear that is made to give maximum protection and flexibility to motorcycle riders. They provide both comfort and protection to the feet and ankles during motocross races, which are typically held on rough terrain with numerous rocks, sand traps, ruts, bumps, and other obstacles that can cause riders to crash and fall off their bikes while racing. To ensure they don’t sustain injuries from these falls, motocross racers wear shoes that not only protect their feet from the ground but also cushion them in case of impact.

 

Are motocross boots necessary?

The short answer to whether it is necessary to get a set of quality motocross boots is: yes. A pair of quality motocross boots should be an integral part of any good rider's gear. Motocross gear in general can vary in price and is completely dependent on how long you've been riding and what level you're at.

Motocross boots are there to help you maximize your performance on your dirt bike, and provide protection for your feet and ankles in case of accidents. Your feet absorb quite a bit of punishment when riding, so having some extra support around your foot is a must. They can also be used as an ankle brace if you take a tumble off your bike. Motocross boots typically have high ankle support and protect vital areas such as toes and heels, making them perfect for off-road riding. The proper fitting of these boots is crucial to avoid injury while riding.

 Why wear motocross boots?

When you step onto your bike, you want to be sure that your feet and ankles are protected from injuries. A good pair of boots will make all of your rides easier by making sure that you can push yourself as hard as possible without worrying about injuring yourself. Motocross riders must wear their gear whenever they're on their bikes, even when practicing at home or out on fun trail rides. Just as it's important to have quality gloves and a helmet, wearing a good pair of motocross boots is essential to being an experienced rider who takes safety seriously.

How are motocross boots supposed to fit?

It’s important to find boots that fit well—motocross boots should have a snug fit with no loose or tight spots. The fit should feel like a comfortable sneaker or athletic shoe. A key way to tell if your boot is too big or small is by checking how far it sits off of your foot. If there’s more than half an inch gap between your leg and boot, it may be too big; on the other hand, if you can’t pull it over your heel, it’s probably too small.

Motocross boots should fit comfortably just the way your normal shoes would. When shopping for a pair of motocross boots, ask yourself if it feels like any excess material is in your way and whether or not your foot has enough room to move around freely. You may even want to give your toes a little wiggle room inside—this can help prevent injury while also helping your comfort level while riding.

Finally, be sure to use athletic shoelaces rather than shoelaces because they won't come untied as easily on your feet.

Remember, dirt bike boots aren't like other footwear where durability isn't as important; they are literally protecting your feet while hurtling around on top of a giant motorized bicycle. Get cheap boots and they'll either break down much faster or simply won't fit correctly when they do start to wear down. A proper fit is critical so it's worth spending extra money up front in order to save even more money down the road. One thing about going cheap when buying motocross boots is that you often end up buying twice since poorly made boots usually don't last very long anyway.

What size motocross boots should I get?

There are lots of factors to consider when trying to figure out what size is best for you. The fit of your new boots will help ensure your safety and comfort while you’re riding and competing, so it’s important to understand how they should fit you. Properly fitting motocross boots can also help prevent some injuries and pains that may come from wearing too-small or too-large shoes while competing. Here’s a quick guide to figuring out what size is right for you.

Most motocross boots run true to size, though occasionally a pair may run small or large in comparison with other pairs. Also keep in mind that sizing differs depending on the brand. For example, Alpinestars run slightly smaller than Held and TCX but slightly larger than Sidi and O’Neal. Keep all these differences in mind as you look for boot sizes.

Boots typically come in two different sizes; a small/medium or a medium/large. To determine your boot size, measure your foot from heel to toe and across. Smaller sized motorsports gloves will fit any rider with a boot size between eight and ten inches, while riders with larger feet (larger than 10) will likely need large-sized gloves, which begin at around 11 inches.

Furthermore, some manufacturers offer half sizes (e.g., 8½) to accommodate those with more specific needs. That said, there's no need to have your feet measured unless you're truly unsure of what size you wear -- most boot manufacturers produce standard-sized products that should fit most riders of average-to-large stature comfortably.

How to clean motocross boots

Motocross boots need to be cleaned after each use for a number of reasons, including hygiene, comfort and performance.

A pair of muddy or dirty boots can end up not only creating discomfort for your feet but also affecting how you ride. When your equipment doesn't fit properly or doesn't feel right on your feet, you lose some of your natural ability to perform at a high level.

With that in mind, here's what you need to know about cleaning your motocross boots:

Remove all visible dirt and mud from each boot with clean water. A stiff-bristled brush should be used if necessary, especially if there is dried-on mud on any parts of each boot.

After removing as much excess dirt as possible, wipe down both pairs of boots with a mild soap solution (such as dishwashing liquid). Avoid using anything too strong that might damage your boots or create holes where germs could penetrate. After washing off any soap residue, allow both pairs of boots to dry overnight—preferably hanging upside down so nothing inside them leaks out onto other surfaces in your house.

The next day, spray a layer of silicone treatment onto both pairs of shoes (or just one if they're identical), paying special attention to areas such as seams and eyelets where they can get torn open easily during off-road use. Allow several hours for your boots to dry again before wearing them outside.

Why are motocross boots so expensive?

If you look at a set of entry-level motocross boots, you'll notice that they're quite expensive. At $500 to $700 a pair, it's understandable why many riders think they’re too expensive and don't consider them when shopping for gear.

However, let’s look at some facts. These things aren't just made from lightweight materials so riders can be as light as possible on their bike; these things also have to protect riders feet and ankles from all manner of debris, ranging from mud and rocks to other hard objects if a rider goes down. They also need to help maintain grip in wet conditions, support ankle joints and help hold foot pressure in place without causing blisters.

Why do motocross boots have metal toes?

Motocross racing is tough on equipment; motors, riders and all their gear can take a beating on a rough track. Yet despite all that abuse, most professional racers use only one pair of boots per season. The reason they're able to keep using just one pair of shoes is because these boots have hard metal toes—even harder than those found in military-grade steel-toed workboots.

These hard metal toes protect against impact injuries to your feet and lower legs when you land after a jump or crash at high speeds. It may seem counterproductive for a motorcyclist who loves speed to wear heavy foot protection, but think about it: You'd rather be sore from bruising than have broken bones from an accident.

Why are motocross boots so stiff and how to soften motocross boots?

Motocross boots have a reputation for being uncomfortable. The reason is that they must be stiff to protect your feet from debris and rocks kicked up by your bike's spinning tires and contact with other riders. They also need to be able to withstand big impacts, like when you bail or get in an accident.

A stiffer boot allows you to pull your knees up closer to your body. This increases your cornering speed. An easier way to understand it is to think of skiing - pulling your knees up shortens your stance, allowing you to accelerate quickly when carving turns down a mountain. Additionally, leaning too far forward in any situation can be dangerous; not just in motocross where crashing is most likely.

To soften your boots, start by rubbing them with a rag soaked in rubbing alcohol to the heel and bridge of the foot areas of the boot. Wear the boots around the house and don’t wipe of the alcohol. The alcohol will quickly dry off and this will soften the leather and make it more comfortable to wear.

Who makes the best motocross boots?

When it comes to your feet, you need more than just a comfortable pair of shoes; you need something that's going to make your riding experience even better. You want a pair of motocross boots that will provide excellent grip and support while being lightweight and easy to clean. That said there are a few names that stand out when riders start discussing the motocross boots brand.

Dainese, Alpinestars and Sidi all make a wide range of high-quality motocross boots for racing. Boots that are comfortable and also protective will reduce your risk of injury and make for a better riding experience.

What are the best motocross boots?

Motocross is an extreme sport, which also requires you to wear protective gear when you're out on your bike. This is why many bikers opt for purchasing motocross boots as they offer comfort and protection while you ride. As with all pieces of clothing, there are several factors that set some brands apart from others. If you're looking for a pair of good quality motocross boots, consider these three features first: grip, flexibility and cushioning.

The following are some of the best motocross boots;

  • Fox Racing Comp 5
  • Gaerne GX-1
  • Fox Racing Comp 8
  • Alpine Stars Tech 7
  • Gaerne SG-12
  • Sidi Crossfire 2 SRS Boots
  • Alpinestars Tech 10
  • Fox Instinct

Motorcycle Boots

Snowmobile Boots

 

Search engine powered by ElasticSuite